Machinery equipment

Machinery

Machinery equipment Kovpal

SERVO-HYDRAULIC TABLE SHEARS SAFAN HT 310/10

These shears are designed to cut metal sheets of length up to 3100mm. Maximum thickness of the sheet with tensile strength 420 MPa is 10mm, 6mm for stainless sleet sheets. The shears have an automatic CNC control and it´s control system operates on the principle of touch screen. Its stops are adjusted automatically with a step of 0.05 mm. SERVO-HYDRAULIC TABLE SHEARS DURMA VS 3010 These shears are designed to cut metal sheets of length up to 3100mm. Maximum thickness of the sheet with tensile strength 420 MPa is 10mm, 6mm for stainless sleet sheets. The shears have an automatic CNC control.

HYDRAULIC BENDING PRESS HAP 30120

Bending press with a force of 1200 kN and working length of 3050 mm is designed to bend sheets with bending depth accuracy of 0.01 mm. Both the control of motoric rear stop and the control of the bending depth is done by programmable numeric control of axis X and Y with digital reading, using 99 programs, each one with a capacity of 20 steps. The press table is equipped with a motor deflection compensation.

ECCENTRIC MECHANICAL PRESSES LENP 25, 63 AND 100

Presses with a force of 2500, 6300 and 10000 kN are designed for punching, bending and shaping steel materials using special gadgets.

CNC BAND SAW FOR METAL BIANCO 370 ADS 3R

This saw is used for cutting profile materials either individually or in bundles and also allows angle cutting. The productivity of labor is increased by the automatic feeding of the material into the cutting zone and the possibility to set various length compositions. These features also guarantee achieving high accuracy of the material´s proportions – accuracy of 0.25 mm.

CNC BAND SAW FOR METAL BOMAR INDIVIDUAL 520, 360 DGANG

This saw is used for cutting profile materials either individually or in bundles and also allows angle cutting. The productivity of labor is increased by the automatic feeding of the material into the cutting zone and the possibility to set various length compositions. These features also guarantee achieving high accuracy of the material´s proportions – accuracy of 0.25 mm.

SPRAY BOOTH SAIMA WITH CARBON FILTERS – Saima Beta and Saima Gamma

This spray booth of dimensions 6000 x 3000 mm is designed for spray painting and has a filtration system, which consist of carbon filters and respects the strictest ecological regulations. The box is heated by gas burners and therefore the freshly painted products can dry faster.

Welding semi-automatic machine MIGATRONIC

Welding semi-automatic machine MIGATRONIC allows welding steel, stainless steel and galvanized materials when using relevant mixed gasses and additional welding material.

WELDING ROBOT CLOOS

Welding robot CLOOS is mainly used for larger series. Rotary positioning table allows welding of products of dimensions up to 1250 x 2500 mm.

WELDING ROBOT MIGATRONIC

Welding robot MIGATRONIC is used basically nonstop, for both larger and smaller series. It is also suitable for welding smaller subgroups.

Servohydraulické tabulové nůžky SAFAN HT 310/10

Nůžky jsou určeny pro stříhání plechů do max. délky 3100 mm. Max. tloušťka plechu s pevností v tahu 420 Mpa je 10 mm, u nerezových plechů 6 mm. Nůžky jsou vybaveny automatickým NC řízením a řídící systém Touch Screen pracuje na bázi dotykové obrazovky. Automatické přestavování dorazů je prováděno krokem 0,05 mm.